Standard Products

NEC/Tokin Metal-Sealed Actuators

AHB800C801 - High Displacement

Without Flange

510C801WD-A0LF_sm2

AHB800C801WP-A0LF - Plane Top

AHB800C801WD-A0LF - V-Groove Top

L = 64.4±0.5

1-9 units: $1,430.00

10-24 units: $1,380.00

25-50 units: $1,325.00

>50 units: Request a quote

Female Thread

510C801NDLF_sm

AHB800C801NP0LF - Plane Top

AHB800C801ND0LF - V-Groove Top

L = 78.4±0.5

1-9 units: $1,465.00

10-24 units: $1,410.00

25-50 units: $1,355.00

>50 units: Request a quote

Flange

510C801FDLF_sm

AHB800C801FP0LF - Plane Top

AHB800C801FD0LF - V-Groove Top

L = 72.4±0.5

1-9 units: $1,465.00

10-24 units: $1,410.00

25-50 units: $1,355.00

>50 units: Request a quote

Top-Plate_both_sm

P - Plane Top

D - V-Groove Top

Specifications

Item	Standard	Conditions
Operating temp range	-25 to +85°C	When applied with a DC voltage: Ambient temp When driven by an AC voltage: Ambient temp + Temp rise due to generated heat
Rec Storage cond	-5 to +40°C
Max driving volt	150V DC
Displacement	80.0 ± 15 um	At 150V DC
Blocking force	800 N	Force required for restricting the displacement to 0 when the maximum driving voltage is applied.
Capacitance	9.3 uF ± 20%	f = 1kHz; V=1Vrms
Dissipation Factor	5.0% or less	f = 1kHz; V=1Vrms
Insul Resist	5 MOhm	Value obtained in 1 minute at 150V DC
Resonant Freq	8 kHz	With both ends of the actuator in free state. Typical value of the element under test conditions
Airtightness	1x10^-8atm cc/sec or less
Temp Cycle Test	Displacement: Initial value ± 30% Capacitance: Initial value ± 30% Tan Delta: Less than initial rated value Insulation resistance: 1MOhm or more Apperance: No noticeable defect	Room temperature (3 min) -25°C (30 min) Room temperature (3 min) +85°C (30 min) Rep of 10 cycles of the above
High Temp Shelf Test	Displacement: Initial value ± 30% Capacitance: Initial value ± 30% Tan Delta: Less than initial rated value Insulation resistance: 1MOhm or more Apperance: No noticeable defect	Temperature 85°C ± 2°C Time 1,000 ± 48h
Solvent resist Test	Displacement: Initial value ± 30% Capacitance: Initial value ± 30% Tan Delta: Less than initial rated value Insulation resistance: 1MOhm or more Apperance: No noticeable defect Mark: Easily legible	Solvent: Isopropyl alcohol Temperature:23 ± 5°C Time: Immersion for 1 min
Heat resist Test	Displacement: Initial value ± 30% Capacitance: Initial value ± 30% Tan Delta: Less than initial rated value Insulation resistance: 1MOhm or more Apperance: No noticeable defect Mark: Easily legible	Temperature: 150 ± 3°C Time: 96 ± 4h