NAC2012-Hxx (Replaces SCMAP03 & 06)
Noliac Plate Actuator Stack
NAC2012 is one of Noliac's plate actuators, which can be stacked according to customers' needs. Noliac's plate stacks are typically used when a medium displacement at high force is required. Noliac's plate stacks are stacks of cofired monolithic piezoelectric low voltage actuators that convert an electrical input to a very high-resolution linear movement at high force.
Noliac's plates are manufactured with ceramic layer thickness down to 20 µm as standard in order to allow very low operating voltage for full performance of the piezo material. Noliac's plate stacks are mostly made to customer specifications, but a wide range of parts is available from stock as well.
NAC2012-Hxx Data Sheet
Product facts:
NAC2012-Hxx | Value | Tolerance |
---|---|---|
Length/outer diameter | 3 mm | +0.3/-0.1 mm |
Width/inner diameter | 3 mm | +0.3/-0.1 mm |
Width max/ Outer diameter max (including bus wire and solder material, no wire) |
4.8 mm | max |
Height (see table below) |
4 - 30 mm | +/-0.2 mm or +/-1%* |
Operating voltage | 150 V | |
Free stroke | 3.14 - 43.89 µm | +/-15% |
Blocking force | 378 N | +/-20% |
Capacitance | 59 - 820 nF | +/-15% |
Stiffness | 121 - 9 N/µm | +/-20% |
Maximum operating temperature | 150 °C | |
Curie temperature | 340 °C | |
Material | NCE51F | |
Unloaded resonance frequency | >248 kHz -> 35 kHz | |
External electrodes | Screen-printed Ag & soldered bus wire | |
Wires | 28 AWG x 200 mm (+/-20 mm) Teflon |
* Whichever is largest
Stack options:
Height | Stroke | Capacitance |
---|---|---|
4 mm | 3.1 µm | 60 nF |
6 mm | 6.3 µm | 120 nF |
8 mm | 9.4 µm | 190 nF |
10 mm | 12.5 µm | 250 nF |
12 mm | 15.7 µm | 310 nF |
14 mm | 18.8 µm | 370 nF |
16 mm | 21.9 µm | 430 nF |
18 mm | 25.1 µm | 490 nF |
20 mm | 28.2 µm | 560 nF |
22 mm | 31.4 µm | 620 nF |
24 mm | 34.5 µm | 680 nF |
26 mm | 37.6 µm | 740 nF |
28 mm | 40.8 µm | 800 nF |
30 mm | 43.9 µm | 860 nF |
Please, specify height when asking for a quote
Typical outline:
The figure below shows the typical outline of NAC Plate Actuator Stacks.
Symbol | Parameter | Unit |
---|---|---|
L | Length | mm |
W | Width | mm |
WM | Width max (including bus wire and solder material, no wire) | mm |
H | Height | mm |