NAC6025-Hxx
Noliac High Temperature Stack Actuator
Noliac high temperature plate stack actuator NAC6025-Hxx (height in mm – Hxx) is designed to perform at high temperature and high frequency. The maximum operating temperature is 200 °C, and combined with a high frequency operation, this is a perfect match for applications, where high temperature and high frequency is a challenge. The actuator can be stacked to match your specific requirements. The standard range of NAC6025-Hxx is produced in a height between 4-50 mm at an unloaded resonance frequency up to 35 kHz depending of the height of the stack.
NAC6025-Hxx Data Sheet
Product facts:
| NAC6025-Hxx | Value | Tolerance |
|---|---|---|
| Length/outer diameter | 5 mm | +0.3/-0.1 mm |
| Width/inner diameter | 5 mm | +0.3/-0.1 mm |
| Width max/ Outer diameter max (including bus wire and solder material, no wire) |
6.8 mm | max |
| Height (see table below) |
4 - 50 mm | +/-0.2 mm or +/-1%* |
| Operating voltage | 200 V | |
| Free stroke | 1.9 - 45.6 µm | +/-15% |
| Blocking force | 800 N | +/-20% |
| Capacitance | 80 - 1920 nF | +/-15% |
| Stiffness | 421 - 18N/µm | +/-20% |
| Maximum operating temperature | 200°C | |
| Curie temperature | 350 °C | |
| Material | NCE46 | |
| Unloaded resonance frequency | >250 kHz -> 22 kHz | |
| External electrodes | Screen-printed Ag and soldered bus wire | |
| Wires | 28 AWG x 200 mm (+/-20 mm) Teflon |
* Whichever is largest
Stack options:
| Height | Stroke | Capacitance |
|---|---|---|
| 4 mm | 1.9 µm | 80 nF |
| 6 mm | 3.8 µm | 160 nF |
| 8 mm | 5.7 µm | 240 nF |
| 10 mm | 7.6 µm | 320 nF |
| 12 mm | 9.5 µm | 400 nF |
| 14 mm | 11.4 µm | 480 nF |
| 16 mm | 13.3 µm | 560 nF |
| 18 mm | 15.2 µm | 640 nF |
| 20 mm | 17.1 µm | 720 nF |
| 22 mm | 19.0 µm | 800 nF |
| 24 mm | 20.9 µm | 880 nF |
| 26 mm | 22.8 µm | 960 nF |
| 28 mm | 24.7 µm | 1040 nF |
| 30 mm | 26.6 µm | 1120 nF |
| 32 mm | 28.5 µm | 1200 nF |
| 34 mm | 30.4 µm | 1280 nF |
| 36 mm | 32.3 µm | 1360 nF |
| 38 mm | 34.2 µm | 1440 nF |
| 40 mm | 36.1 µm | 1520 nF |
| 42 mm | 38.0 µm | 1600 nF |
| 44 mm | 39.9 µm | 1680 nF |
| 46 mm | 41.8 µm | 1760 nF |
| 48 mm | 43.7 µm | 1840 nF |
| 50 mm | 45.6 µm | 1920 nF |
Please, specify height when asking for a quote
Typical outline:
The figure below shows the typical outline of NAC Plate Actuator Stacks.
| Symbol | Parameter | Unit |
|---|---|---|
| L | Length | mm |
| W | Width | mm |
| WM | Width max (including bus wire and solder material, no wire) | mm |
| H | Height | mm |
