Miniature Amplifier CAµ10

The CAµ10 is a unipolar (5V..150V) miniature linear amplifier with low noise and low cost features. A SPI digital to analogue converter is able to convert 12 bits words in analogue signal for the linear amplifier. Optional inputs can be connected if necessary to shunt the SPI bus and send directly the analogue order on the linear amplifiers. The CAµ10 is compatible with the numeric controller UC45.

Maximum output current: 5 mA

Options: Push Pull

Status: Standard Product

CAµ10 Data Sheet

Linear Amplifier LA75A

The Linear Amplifier LA75A is designed to drive capacitive loads like Piezoelectric Actuators with extremely low noise. It can perform amplifing operations in the -20/+150V range. The LA75A is a medium-power amplifier, integrated inside a Rack (RK42F) equiped with an AC/DC converter LC75A board.

Options: Strain Gauges Sensors Conditioner; Eddy Current Sensors Conditioner; Push Pull; Digital Servo-controller UC45

Status: Standard Product

LA75A Data Sheet

Linear Amplifier LA75B

The Linear Amplifier LA75B is designed to drive capacitive loads like Piezoelectric Actuators with extremely low noise. It can perform amplifing operations in the -20/+150V range. The LA75B is a medium-power amplifier, integrated inside a Rack (RK42F) equiped with an AC/DC converter LC75B board.

Options: Strain Gauges Sensors Conditioner; Eddy Current Sensors Conditioner; Push Pull; Digital Servo-controller UC45

Status: Standard Product

LA75B Data Sheet

Linear Amplifier LA75C

The Linear Amplifier LA75C is designed to drive capacitive loads like Piezoelectric Actuators with extremely low noise. It can perform amplifing operations in the -20/+150V range. The LA75C is a medium-power amplifier, integrated inside a Rack (RK63F) equiped with an AC/DC converter LC75C board.

Options: Strain Gauges Sensors Conditioner; Eddy Current Sensors Conditioner; Push Pull; Digital Servo-controller UC45

Status: Standard Product

LA75C Data Sheet

Linear Amplifier SA75X

The SA75X series is a new high power amplifier dedicated to supply piezo-electric actuators. Using high frequency PWM with a specific topology for piezo-electric loads, the SA75x series offers large power and a very low ripple. These special features make the SA75X series perfect for dynamic and precise motion applications.

Options: Actuator temp. Sensor LEMO EPG-00-302-NLN

Status: Standard Product

SA75A Series Data Sheet

SA75B Series Data Sheet

SA75D Series Data Sheet

Switching Power SP75A

The SP75A is a bipolar (-20/+150V) switching power amplifier for driving low voltage piezoelectric actuators. The SP75A is integrated inside a Rack equiped with an AC/DC converter LC75B board.

Options: Strain Gauges Sensors Conditioner; Eddy Current Sensors Conditioner; Analog & Digital Servo-controller

Status: Standard Product

SP75A Data Sheet

Strain Gauges Conditioner SG75

The SG75 Strain Gauge conditioner is attached to a 19' card. The conditioner is generally set starting from the Strain Gauges bridges bonded onto Piezo Actuators. This board can be sold on its own in a RK12F rack.

Status: Standard Product

SG75 Data Sheet

Controller UC55

The UC55 board has the same format than the UC45, but it features a higher control rate and it exists in three different versions: single channel, dual channel, and triple channel. In single channel, the control rate is 30kSps, in dual channels, 15kSps, and in triple channels, 10kSps. The UC55 boards can also be stacked to handle several independent control channels at high frequency (up to 3).

Status: Standard Product

UC55 Data Sheet

Controller UC75

The new UC75 is a new plateform including real time targets able to improve the performances of the control techniques of the actuators. The UC75 includes a National Instrument Core based on Compact RIO.NI and the power of the Labview.NI Libraries to control any system with fast ticks with deterministic time.

Options: Multi-channels control

Status: Standard Product

UC75 Data Sheet