TOKIN - Resin Coated Multilayer Piezoelectric Actuators
AE1010D16 (T=10mm x W=10mm x H=20mm)
|
|
AE1010D16F-Thick Coating1-4 units: $395.00 5-9 units: $355.00 10-24 units: $295.00 25-50 units: $275.00 >50 units: Request us for a quote |
|
|
AE1010D16DF-Thin Coating1-4 units: $395.00 5-9 units: $355.00 10-24 units: $295.00 25-50 units: $275.00 >50 units: Request us for a quote |
Specifications
| Item |
Standard |
Conditions |
| Operating temperature range |
-25 to +85°C |
When applied with a DC voltage: Ambient temperature
When driven by an AC voltage: Ambient temperature + Temperature rise due to generated heat
|
| Recommended Storage condition |
-5 to +40°C / less than 40% R.H. | Recommended storage at room temperature. No condensation |
| Maximum driving voltage | 150V DC | |
| Displacement |
18.4±3.5µm | At 150V DC |
| Blocking force | 3,500 N | Force required for restricting the displacement to 0 when the maximum driving voltage is applied. |
| Capacitance | 5.4 µF ± 20% | f = 1kHz; V=1Vrms |
| Dissipation Factor |
< 5.0% | f = 1kHz; V=1Vrms |
| Insulation Resistance |
5 MOhm | Value obtained in 1 minute at 150V DC |
| Resonance Frequency |
69 kHz | With both ends of the actuator in free state. |
| Tensile strength | 1/10 of generated force | Typical value of the element under standard factory tests conditions |
| Young's Modulus |
4.4x1010 N/m2 | Typical value of the element under standard factory tests conditions |
| Temperature Cycle Test |
Displacement: Initial value ± 20%
Capacitance: Initial value ± 30%
Tan Delta: Less than initial rated value
Insulation resistance: 1MOhm or more
Apperance: No noticeable defect
|
Room temperature (3 min)
-25°C (30 min)
Room temperature (3 min)
+85°C (30 min)
Repetition of 10 cycles of the above
|
Outer Dimensions
|
|
Model: AE1010D16F T1 = 10±0.1 mm W1 = 10±0.1 mm H = 20±0.1 mm T2 = 11.5 mm max. W2 = 11.5 mm max. Wire length = 100mm |
Model: AE1010D16DF T1 = 10±0.1 mm W1 = 10±0.1 mm H = 20±0.1 mm T2 = 10.4 mm max. W2 = 10.4 mm max. Wire length = 100mm |
Wire Dimmensions
 |
d = 0.5 mm D = 0.8 mm Length of wire: 100 mm AWG: 26 UL number: 1371 Factory-shipped polarization: RED lead wire = (+) POSITIVE WHITE lead wire = (-) NEGATIVE Wire: Copper wire with Tin plating Coating: PTFE (Polytetrafluoroethylene) |
