Micromechatronics, Inc. (MMech)

Your development partner in electro-mechanical systems

MTPA-2601SPA

Piezo Assist Stage

Drawings and dimension (Units: mm)

MTPA 2601SPA lg

 MTPA 2601SPA lg2

Specifications

Table Size 60x60mm
Course Drive Travel ±6.5mm
Fine Drive Travel >30μm
Micrometer position Side
Movement per Rotation 0.5mm
Micrometer Readable Resolution 0.01mm
Fine movement minimum resolution <20nm
Guide Ball Bearing guide
Primary material Aluminum
Finish Black Anodize
Load capacity 49N (5.0kgf)
Travel accuracy/Straightness 3μm
Max. Moment Capacity/Pitch 4.9 N·m
Max. Moment Capacity/Roll 4.9 N·m
Max. Moment Capacity/Yaw 4.9 N·m
Moment Stiffness/Pitch 0.3"/N·cm
Moment Stiffness/Roll 0.25"/N·cm
Parallelism 30μm
Running Parallelism 10μm
Mass weight 0.25kg

Caution

  • Please handle the micrometer bracket with caution during the setup of the stage. If any shock occurred, the Piezo Assist mechanism may be damaged.
  • When the power of the Piezo Assist controller is being switched OFF, there will be changes on the position adjustment of Piezo Assist, causing fine adjustment position alignment changes.
  • Please make sure to lock the stage when moving/carrying the Piezo Assist Stage. Moving/Carrying the Piezo Assist stage may cause damage to the Piezo Assist mechanism.

More Information

101 Innovation Blvd. Suite 308
State College, PA 16803, USA
Ph: (814)-861-5688
contact@mmech.com
MMechLogosm