MTPA-2251SZPA
Piezo Assist Stage
Drawings and dimension (Units: mm)
Specifications
| Table Size | 25x25mm |
| Course Drive Travel | ±3mm |
| Fine Drive Travel | >25μm |
| Micrometer position | Side |
| Movement per Rotation | 0.5mm |
| Micrometer Readable Resolution | 0.01mm |
| Fine movement minimum resolution | <20nm |
| Guide | Ball Bearing guide |
| Primary material | Aluminum |
| Finish | Black Anodize |
| Load capacity | 9.8N (1.0kgf) |
| Travel accuracy/Straightness | 3μm |
| Max. Moment Capacity/Pitch | 1.47 N·m |
| Max. Moment Capacity/Roll | 1.47 N·m |
| Moment Stiffness/Pitch | 6.0"/N·cm |
| Running Parallelism | 20μm |
| Mass weight | 0.07kg |
Caution
- Please handle the micrometer bracket with caution during the setup of the stage. If any shock occurred, the Piezo Assist mechanism may be damaged.
- When the power of the Piezo Assist controller is being switched OFF, there will be changes on the position adjustment of Piezo Assist, causing fine adjustment position alignment changes.
- Please make sure to lock the stage when moving/carrying the Piezo Assist Stage. Moving/Carrying the Piezo Assist stage may cause damage to the Piezo Assist mechanism.
Product Catalog
