Micromechatronics, Inc. (MMech)

www.mmech.com - Ph: 814-861-5688

Plate Bender 6 (CMBP06)

Noliac Plate Bender Actuator

Noliac CMBP's are typically used when a large displacement at low force is required. Noliac CMBP's are cofired monolithic piezoelectric low voltage actuators that convert an electrical input to a very high-resolution bending movement at one end of a plate shaped actuator.

Noliac CMBP's are manufactured with ceramic layer thickness down to 67µm as standard in order to facilitate very low operating voltage for full performance of the piezo material. Noliac CMBP's are mostly made to customer specifications, but a wide range of parts is available from stock as well.

pdf-icon_smCMBP06 Data Sheet

Product facts:

CMBP06 ValueTolerance
Length/outer diameter 32 mm ± 0.65 mm
Width/inner diameter 7.8 mm ± 0.15 mm
Height 1.8 mm ± 0.10 mm
Operating voltage (*)
200 V (*)

Free stroke +/- 210 µm ± 15%
Blocking force 4.3 N ± 20%
Capacitance 2 x 480 nF ± 15%
Stiffness 0.0205 N/µm ± 20%
Maximum operating temperature 150 °C
Curie temperature 350 °C
Material NCE57 (S1)
Unload resonance frequency > 705 Hz
External electrodes Ag
Wires 28 AWG x 200 mm (+/-20 mm) Teflon

(*) Operating voltage is 200V (+/- 100V)

Typical outline:

The figure below shows typical outline of CMBP's

CMBP-01_dwg_med

SymbolParameterUnit
L Length excluding external electrodes mm
Lc Clamping length = 3.5 mm
W Width mm
H Height mm
All technical information of this document is not contractual and can be changed without prior notice.